Fully Automatic One to Two Disposable Medical Surgical Face Mask Machine
This machine is mainly used for automatic forming of flat masks. After the entire roll of fabric is unrolled, it is driven by rollers, and the fabric is automatically folded and wrapped. Nose bridge rolls unrolled by traction. Cut and import into the hemmed fabric, both sides are welded to seal by ultrasonic welding, and then through the ultrasonic side seal. It is cut and shaped by a cutter ; transported to the two mask ear band welding stations through an assembly line. The final mask is formed by ultrasonic welding. After the mask is made, it is transported to flat belt line and collected.
Making 3 layer disposable mask for common use
Making 4 layer medical mask for hosiptal use
Feeding--Molding--2 Station Separator-- 2 Ear Loop Machines
28 days after 40% downpayment
Function introduction :
This production line is a fully automatic one-to-two mask machine, one body machine drives two ear band machines. After the main body machine
outputs the mask body, the mask body sheet is conveyed to the turning mechanism by a conveyor belt structure. The reversing mechanism is used to flip the mask plate onto the belt connected to the ear band machine, and then the mask sheet is conveyed to the first mask plate on the front of the ear band machine through the conveyor belt, and finally the mask sheet is placed on the ear band by the cylinder pressing In the mask plate of the machine, the ear band machine is used to complete the welding of the ear bands of the mask and the edging, thereby completing the production of an ear band mask product. This machine adopts PLC, touch screen control, single-phase motor for main conveyor belt, stepping motor turning, precise transmission, stable control and adjustable speed.
1. High stability, low failure rate, beautiful appearance without rust;
2. Computer PLC programming control, servo drive, high degree of automation;
3. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
The technical parameters
1. Machine size length, width, and height: the whole machine has a size of 4500mm × 5500mm × 1830mmmm;
2. Voltage: AC220V 50-60HZ
3. One-to-two production line efficiency: 100-120 tablets / min
4. Power: 8.5KW
The Main Electrical Parts Main Machine Configuration:
1.Variable frequency motor
2. Ultrasound 2 sets
3. plc control 1 set
4. 2 sets of electronic eyes Ear strap machine configuration: 1. 2 sets of variable frequency motors
Q1: What's the lead time of your machine?
A1: Normally it's about 15~45 working days.
Q2: What's the payment terms?
A2: 30% deposit TT, 70% paid before shipment.
Q3: Can we check face mask machine before order?
A3: Yes, welcome to visit and check machine anytime.
Q4: Is it difficult to install the machine ?
Q4: For standard small machines, the machines will be packed with no take apart, it comes to you to be a complete machine; you
just need to connect power and compressed air to machine, then begin to operate the machine.For large size machines, we will take
the machine apart, on condition that we do our best to keep the machine easy to assembly.You will get videos and instructions
about installation of machine from us.
Q5: Does the machine power voltage meet buyers' factory power source?
A5: We can do it as your request.