|Place of Origin:||China|
|Certification:||CE ISO SGS|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Standard export packing with each machine tied and protected in container|
|Delivery Time:||65-90 work days|
|Supply Ability:||10 sets / month|
|Name:||Floor Deck Panel||Thickness Of Plate:||0.8 - 1.2mm|
|Raw Material:||Steel / Metal||Warranty:||1 Year|
|Material Of Forming Roller:||45# Steel||Width Of Plate:||1200mm|
metal deck roll forming machine,
step tile roll forming machine
Diameter 95mm Floor Deck Roll Forming Machine Russian / European Style
Floor decking machine main material is galvanized sheet material, via pressure-type device be pressed into different types of floor boards, mainly as a multi-level and multi-storey factory building structure instead of the original template. Floor decking machine replace the tradition way, this is a good way to protect woods. Using the floor deck can improve the rigidity of the floor, saving the amount of steel and concrete. It is a part of the structural strength. Compared with the old ways, using floor deck is easy to installation and construction, and can save much time.
Technical Parameters of Floor Decking:1. Steel Sheet Thickness: 0.75-1.2mm (depend on requirement )
|Mchine composition||Quantity||Detailed information|
|5T Hydraulic decoiler||1 set||
Hydraulic system to expand coil inner hole; Pump motor: 3.0KW
Frequency Inverter to regulate turn speed; Motor:5.5KW
Coil Inner diameter=510±30mm. Coil Outer diameter Max. 1300mm;
Load Capacity: Max. 5T; Coil Width Max. 1250mm
|Hydraulic Pre-cutting Device||1 set||Smart cut control, to cut off the end of the final plece of sheet only|
|Cold Rolling Mills||1 set||
Feeding section with guide
Gear/Sprocket driving; 29-step to form
Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated
Shafts Diameter=95mm, Precision Machined
Main motor=15 WX2,
Max. speed of roll former:max. 18-20m/min
|Hydraulic cutting device||1 set||
Stop to cut , post cut, slug breaker
Cutting tool material: Cr12, heat treatment; mould steel with quenched treatment
Hydraulic unit, Pump motor=5.5KW
|PLC Control System||1 set||
Control the quality and cutting length automatically;
Combined with PLC, Inverter(Delta), Touch Screen(Weinview), Encoder(Omron) and so on.
Cut to length tolerance≤±2mm
Control voltage 24V
|Exit table||1 set||4 meters long, un-powered|
1: rapid construction of steel structures to adapt to the requirements of the body, providing a firm operating platform in a short time, and can use multiple floors laying steel sheeting, water pouring layered construction of concrete panels.
2: Floor boards as concrete slab tensile reinforcement, but also improve the rigidity of the floor, saving the amount of steel and concrete.
3: The pressure plate embossed surface make concrete between the floor boards and the greatest binding force, so that the two form a whole, with stiffening ribs to make floor plate system with high-strength bearing capacity.
4: In the boom conditions, the floor boards only as permanent formwork. The length of the cantilevered section properties may vary depending on the floor boards to be. To prevent cracking cantilevered plate at the support required in accordance with structural engineers design coupled with negative reinforcement.
Contact Person: Manager