Energy saving automatic 3 ply disposable facial mask machine Mask Making Machine
The face mask making machine is mainly used for the automatic making of flat masks: the whole roll of fabric is driven by rollers after unwinding, and the fabric is automatically folded and hemmed; Bridge of nose strip whole roll traction unroll,cut to length and guide into hemmed fabric. Two sides Ultrasonic welding to the seal, then ultrasonic 2 ends sealing, cutting and shaping by a cutter; conveying the mask to the two mask ear band welding stations through an assembly line, and finally forming the mask by ultrasonic welding; when the mask is made, it is transported to the flat belt line for collection. Complete line include 1 set mask body making machine and 2 sets ear loop automatic welding machine.
This equipment is a full-automatic one-time plane mask forming machine, which is used for the forming of one-time rectangular ear hanging three drawer mask. It can complete the automatic feeding, moulding, folding, pressure welding and ear band welding of the mask. The equipment outputs the finished product of the mask.
One main machine of the machine is equipped with two ear belt spot welding machines (one for two), which are controlled by PLC Mitsubishi PLC. The driving motor is servo motor, so it has the advantages of high reliability, easy operation, accurate transmission, stable control, adjustable speed, low cost and convenient maintenance, especially suitable for the production of high-quality masks.
Temperature 10-35 °, humidity
5-35%, no flammability and corrosiveness
|Working supply voltage
|Total power of equipment
|Overall dimension of equipment
|Max. feeding width
||120 tablets / min
The machine is composed of feeding frame, forming machine and welding ear belt. Three rolls of cloth can be placed on the loading rack.
The molding machine consists of a frame, a transmission device, an ultrasonic generator (welding joint) and a cutting device.
The utility model is composed of a device for removing static electricity, an operation control panel and other component
1. Cutting roller
We use the chrome steel to cover the rubber roller both sides .So that the rubber is not crack from side after extended periods use.
2. Traction roller
We use the silicone rubber materials instead of the butyronitrile materials .The silicone rubber materials is good abrasion
resistance and will not crack
3. PLC touch screen
We use DELTA group brand PLC touch screen .
4. Mask nose strip tension controller
We use Mask nose strip tension controller .This device can avoid the nose strip differ in length .
5. Nose strip straight- feeding device
We use Nose strip straight- feeding device , It can ensure the nose strip be feeded straightly in the processing, so the finished
mask will be flat and artistic.
7. Non woven raw materials sensors
We use Non woven raw materials sensors,once the raw materials use up,machine will stop automatically
8. Raw materials tension controller 1
We use the Raw materials tension controller to avoid the materials plugging .
9. Raw materials tension controller 2
Our machine is equipped with two braking ways . One is belts pressing and another is screw fixing . You could choose either one or use both according to your need.
10. Raw materials EPC device
We use raw materials EPC device ,to do materials adjustment.
11. Machine door lock
We just door lock ,with out the key,worker can not start the machine.
12. Frequency converter
We use DELTA group brand frequency converter .
13. Machine body and materials feeding connect board,We connect Machine body and material feeding frame with connecting boards,so that the running of whole machine will be very
14. Electrostatic eliminator
In our machine we have one electrostatic eliminator . to eliminate non woven mask surface static.
15. Machine motor
Our geared motor is new type and no need refuel.
We install the fan near the ultrasonic horn ,to Lower the horn temperatures,to to extend ultrasonic life.
This machine is a modern fully automatic mask production equipment. It adopts advanced high-tech and professional engineers to jointly development. It has high production speed, high stability, and fully equipped mask equipment. On the feeding rack, after the modulation is ok, the machine automatically produces until the finished product. Only 2-3 people need to operate the packaging, fully automatic production. The equipment adopts ultrasonic welding, which is beautiful in style, hygienic and environmentally friendly.
Imported raw materials, welded molded body pieces, photoelectric detection, automatically assigned to the earband machine,ultrasonic earband welding, finished product output, automatic classification, and full automation.
Machine size: 3345 (L) × 6500 (W) × 1830 (H) mm
Voltage: AC220v, 50hz / 60hz, single phase
Output: 100-150 tablets / minute
Power consumption: 8.7kw
At present, it can be equipped with: 1. inner ear belt machine, 2. outer ear belt machine, 3. strap mask machine, etc.).
Plane masks: 2 layers of non-woven masks, 3 layers of non-woven masks, four layers of activated carbon masks.
Size: 17.5 × 9.5cm (adult), 15 × 9cm (child).