|Place of Origin:||China|
|Certification:||CE ISO SGS|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Standard export packing with each machine tied and protected in container|
|Delivery Time:||60-90 days|
|Name:||Continuous PU Sandwich Panel Production||Control System:||PLC|
|Product Thickness:||50-300mm||Production Speed:||4-12m/min|
|Material Of Roller:||40Cr||Electric Power::||About 400kw|
polyurethane sandwich panel machine,
continuous sandwich panel line
Continuous Polyurethane Sandwich Panel Production Line For Roof / Wall Panel
Polyurethane resin,curing agent,and foaming agent are delivered to high-speed mixing head in certain proportion through metering pump,evenly mixed and continuously coat on basal plate by coating head’s reciprocating motion,then enter into double crawler machine with plate,foam and cure between the top and bottom layer of heated double crawler machine;when it is cured and shaped,the trimming device on both sides will get it into accurate size.Finally,the sizing following tracing cutting machine cut off it as per preset length.
Product application of PU Sandwich Panel Production Machine
Due to its high efficiency and simple operation, this forming machine is widely used in the construction of steel structure enclosures, cold storages, and mobile buildings.
In order to satisfy various customer requirements, we design and manufacture PU sandwich panel producton lines in different specs, models and configurations.
Technical Data of PU Sandwich Panel Production Machine
|Sandwich Panel Spec|
|Min. cutting length||3 meters|
|Max. stacking length||15m|
|Panel width||1000mm (can be designed as per client’s requirment)|
|Panel thickness||Mini thickness||40mm (corrugated sandwich panel)
50mm (wall panel)
|Max. thickness||150mm(exclude corrugated sandwich panel)|
|Steel Sheet Spec|
|Thickness||0.4-0.7mm color steel sheet|
|Width||1250mm (can be designed as per client’s requirment)|
|Max. coil weight||10 tons|
|Inner Dia. of coil||508mm|
|Whole Line Spec|
|Working speed||About 3-7m/min (adjustable)|
|Total length||about 105m|
|Working height||1200mm (height of panel coming out)|
|Pressure for foaming||150-200 bar|
|Double belt conveyor||23m|
|Control mode||Mitsubishi PLC and converter|
|Total power||About 100Kw (as per final designing)|
|Power required||380V/3phase/50Hz or as per customer's requirement.|
|Air pressure||0.7Mpa (for buyer to prepare)|
|The thermal conductivity||0.019-0.023W/M.K|
|Moisture permeability coefficient||≤3.34Ng/Pa/m.s|
|The compression strength||≥220KPa|
|The bending strength||≥2450KN/m2|
|Exterior Steel thickness||0.4-0.7mm|
|Interior steel thickness||0.4-0.7mm|
|Core material thickness||40/50/60/75/100/120/150/200mm|
|Length||Less than 11.8m|
|Effective width||Wall panel:400-1120mm;Roof panel:1000mm|
|Grace finish||Embossment,small wave,big rib,flat finish|
|Advantage||Heat Insulation, light weight, quick installation,waterproof, fireproof, soundproof, energy-saving,environmental friendly,|
|Usage||Various roofs and walls referring to the large size factory building ,workshop,coldstorage,villas,|
1. Designed by 15 years experienced R&D members with lifetime seivices.
2. We are "All-in-house source" factory to ensure quality and delivery of your machines.
3. Machine’s lifetime>15 years
4. Quick delivery: in only 5-8 weeks for urgent order .
5. Introduced Mitsubishi PLC and touch screen for machine’s control system.
6. Have our own tool center: 12 sets of CNC machines.
7. High Pricision perofrmance: Shafts are tooled by grinding machine for two times. Rollers are tooled by CNC machines.
8. Technician can be sent to your factory to install machines and train your workers.
type of uncoiler:manual
material of coil:color coating coil
thickness of sheet:0.3~0.8mm
width of coil: 1000mm,1200mm
weight of coil:≤ 5 t
inside diameter of coil:480~520mm
apply guard film
type of apply guard film:automatic
type of shearing:electrical shearing
driven power: 0.75 kw
edge forming machine for wall
design of profile:see drawing attached
type of forming:one layer forming
material of roller: 45 steel heat treatment
thickness of chromic plating of roller surface:0.05～0.06mm
speed of forming:0～6.0m/min synchronies with panel machine
type of synchronies:electrical synchronies
driven power: 3.0 kw
installation instruction:two parts
size of forming machine:8000×2200×2200mm
weight of forming machine:～8 t
Contact Person: Manager