Fully Automatic KN95 N95 Mask Machine, Mask Production Line for Three Layer Filter
This production line is a fully automatic one-to-two face mask machine, one body machine drives two ear band machines. After the main body machine outputs the mask body, the mask body sheet is conveyed to the turning mechanism by a conveyor belt structure. The reversing mechanism is used to flip the mask plate onto the belt connected to the ear band machine, and then the mask sheet is conveyed to the first mask plate on the front of the ear band machine through the conveyor belt, and finally the mask sheet is placed on the ear band by the cylinder pressing In the mask plate of the machine, the ear band machine is used to complete the welding of the ear bands of the mask and the edging, thereby completing the production of an ear band mask product.
1. Mask machines are used for full-automatic folding mask production (typical models like N95 mask).
2. The working process of N95 Mask Machines are as follows: The multi-layer non-woven fabric rolls are subjected to compound roll welding after feeding. Nasal lines are welded after unrolling and cutting. Two rolls of rubber band are welded after automatically unrolling and cutting to designated length. Then masks are folded in half. After ultrasonic welding and fusion, the masks are rolling-cut and formed. Finally, we get finished N95 masks.
3. The masks produced by we have great filtration effect, perfectly fit face of people and are comfortable to wear without causing any pressure . The masks can be applied to various fields, like medical, electronics, mining, construction, etc. N95 Mask Machine uses PLC, touch screen control and the main conveyor adopts unidirectional motor transmission, which can achieve precise movement, stable control and adjustable speed.
a.Fully automatic N95 production line
b.High stability, low failure rate, industrialized in appearance, sturdy without rust.
c.Computer PLC programming control, servo drive, high degree of automation.
d. Automatic tension control of raw materials to ensure the balance of raw material
5. Photoelectric detection of raw materials to avoid errors and reduce waste.
Q1: What's the lead time of your machine?
A1: Normally it's about 15~45 working days.
Q2: What's the payment terms?
A2: 30% deposit TT, 70% paid before shipment.
Q3: Can we check face mask machine before order?
A3: Yes, welcome to visit and check machine anytime.
Q4: Is it difficult to install the machine ?
Q4: For standard small machines, the machines will be packed with no take apart, it comes to you to be a complete machine; you
just need to connect power and compressed air to machine, then begin to operate the machine.For large size machines, we will take
the machine apart, on condition that we do our best to keep the machine easy to assembly.You will get videos and instructions
about installation of machine from us.
Q5: Does the machine power voltage meet buyers' factory power source?
A5: We can do it as your request.